ARC-5066

(GbE(x4) / 6Gbps eSATA / USB 3.0 to SATA RAID Storage Subsystem)

System Architecture

✵ Support up to 24 x 6.0Gbps SATA disk channels

✵ Support multiple host:GbE(x4)/6Gbps eSATA/USB 3.0

✵ Support up to 2GB, optional BBM cache

✵ LAN with MPIO, MC/S, Trunking and LACP support

✵ RAID 6 and advanced power management

✵ Support HDD firmware download

✵ With LACP enabled, performance: 415 MB/sec Reading, 324 MB/sec Writing

I/O Interface

1 x 6.0Gbps eSATA

1 x 5.0Gbps USB 3.0

4 x 1.0Gbps GbE iSCSI

Management Interface

1 x RS-232 connector

1 x LAN RJ-45 connector

Disk Interface

12/16/24 x 6.0Gbps SATA ports

Up to 6 x SFF-8087 drive connector

GbE(x4) / 6Gbps eSATA / USB 3.0 to SATA RAID Storage Subsystem

The ARC-5066 RAID controller is a family of 8/12/16/24 6.0Gbps SATA hard drive ports depending upon the amount of storage required. The ARC-5066 supports multiple host interfaces; eSATA lll, iSCSI or USB 3.0 that can work with different application requirement.

When properly configured, the RAID subsystem can provide non-stop service with a high degree of fault tolerance through the use of RAID technology and advanced array management features. The 4 port iSCSI connections deliver high performance, advanced function, high availability, and scalable storage capacity with both direct iSCSI host and IP network connectivity.

	Cost-Effective ARC-5066 Series SATA RAID Controller
	ARC-5066
Processor	Quad Core ARM V7 1.2 GHz processor
Cache Protection	2GB DDR3-1200 ECC Protection
Host Interface	1 x 6.0Gbps eSATA, 1 x 5.0Gbps USB 3.0 and 4 x 1.0Gbps GbE iSCSI
Internal Ports	Up to 24 internal SATA
Drive Connectors	6 x internal SFF-8087
Data Transfer Rate	Up to 6Gb/s per port
Physical Dimensions	146(W) x 43(H) x 200(D) mm
Power Consumption	32W max
Operating Temperature	0 °C to 40 °C
Operating Humidity	10% to 80%, non-condensing
Regulatory Certification	CE, FCC
BBM Support	ARC-6120BAT121-7
RAID Features	RAID level 0, 1, 10(1E), 3, 5, 6, 30, 50, 60, Single Disk or JBOD Multiple RAID 0 and RAID 10(1E) support (RAID 00 and RAID 100) Configurable stripe size up to 1024KB Automatic drive failover and detection and rebuild using multiple Global, Dedicated or Enclosure hot- spare drives Multiple pairs SSD/HDD disk clone function SSD automatic monitor clone (AMC) support SED (Self-encrypting drives) function support Support for native 4K and 512 byte sector devices Support HDD firmware update Hot-swap and redundant components for increasing availability eSATA host: 8 volumes(with port multiplier), iSCSI host:128 volumes and USB 3.0 host: 8 volumes

Management Monitor

McRAID Storage Manager

Web-based GUI management utility

Remote configuration, monitoring, and notification

ArcSAP Graphical-based management utility

SNMP support for remote manager

SMTP support for email notification

ArcCLI (command-line interface)

API with sample and functional code

Flashable firmware via RS-232 and LAN port

Monitors/Notification

Global HDD activity/fault connector, individual activity/fault connector

LCD/I²C connector and alarm buzzer

Support 4 x 3-pin fan connector

Support 2 x 2-pin power status connector

Keep silent and adequate air flow and cooling by intelligent cooling fan speed control

Optional Prouduct - Accessories

An ATX I/O Shield is a small metal plate located at the back of each rackmount chassis that provide openings for different I/O ports of a motherboard.

ARC-8028MB-Mounting Bracket for user to leverage the ATX I/O Shield position as ARC-5066 box I/O port. You can use ARC-8028MB to fit ARC-5066 box I/O port in the standard ATX I/O-Slot found in a Rackmount Chassis.

Downloads

Documents

File	Version	Date
ARC-5066 Specification	1.0	2016/01/15
ARC-5066 User Manual	1.0	2017/04/24
CLI Utility For LAN Port - User Manual	5.2	2022/01/04
ArcSAP User Manual	4.2	2020/11/03

Firmware

File	Version	Date
ARC-5066 firmware	1.64	2022/09/05
1. Fix iSCSI with 4K block support

Driver & Utility