SATA RAID Adapters
  SAS RAID Adapters
  Mezzanine Board
  SAS Non-RAID Adapters
  External RAID CTRL
-- ARC-8088-iSCSI
  JBOD/Expander Box
  RAID Subsystem
  Internal RAID Rack
  Thunderbolt Solutions


> Products > External RAID Controller
      > ARC-5066
      > ARC-8068 > ARC-8088-SAS
      > ARC-8088-Fibre > ARC-8088-iSCSI

Relatived Resource  
ARC-8088 DataSheet
ARC-8088 Quick Start Guide
ARC-8088 manual


Third Party Enclosure  
  MTC 316 W & MTC 424 Enclosures With Areca Series 12Gb/s Products  




(iSCSI-to-SAS 12Gb/s RAID Controller)

The 12Gb/s SAS interface supports both 12Gb/s SAS disk drives for data-intensive applications and 6Gb/s SATA drives for low-cost bulk storage of reference data.

The iSCSI to 12Gb/s SAS RAID controllers attach directly to SATA/SAS midplanes with 6 x Min SAS HD SFF-8644 external connectors or increase capacity using one additional Min SAS HD SFF-8644 external connector. When used with 12Gb/s SAS expanders, the controller can provide up to (256) devices through one or more SAS JBODs, making it an ideal solution for enterprise class storage applications that called for maximum configuration flexibility.
  Controller Architecture

Dual core RAID-on-Chip (ROC) 1.2GHz processor
  2GB on-board DDR3-1866 SDRAM with ECC protection
  Write-through or write-back cache support
  Supports up to 256 SATA or SAS devices using SAS expanders
  DataBolt™ Bandwidth Optimizer for balance faster host and
slower SAS or SATA devices.
  Redundant flash image for controller availability
  Real time clock support
  Support flash-based or battery backup module (FBM/BBM) ready (optional)
  RAID Features
  RAID level 0, 1, 10(1E), 3, 5, 6, 30, 50, 60, Single Disk or JBOD
  Multiple RAID 0 and RAID 10(1E) support (RAID 00 and RAID100)
  Multiple RAID selection
  Configurable stripe size up to 1024KB
  Support HDD firmware update
  Online array roaming
  Online RAID level/stripe size migration
  Online capacity expansion and RAID level migration simultaneously
  Online volume set growth
  SED (self-encrypting drives) function support
  Instant availability and background initialization
  Support global and dedicated hot spare
  Support for native 4K and 512 byte sector SAS and SATA devices
  Multiple pairs SSD/HDD disk clone function
  SSD automatic monitor clone (AMC) support
  Support intelligent power management to save energy and extend service life
  Support NTP protocol to synchronize RAID controller clock over the on-board LAN port
  Redundant controller operation with active/active and failove r/failback function
  Dual-active RAID controller with cache mirroring through dedi cated high speed bus
  Automatic synchronization of firmware version in the dual-act ive mode
  Multi-path & load-balancing support (MPIO)
  Max 256 devices
  Max 128 LUNs (volume set) per controller
  Management port seamless take-over
  Drive Interface
  1 x SAS "Expansion Out" for an additional JBOD enclosure
  Up to 24 x 12Gb/s internal port using 6 x Min SAS HD SFF-8643 connectors
  Up to 256 devices using SAS expanders
  Host Interface
  12Gb iSCSI-to-SAS
  Two 10Gb/s iSCSI channels
  iSCSI Hardware iSCSI off-load engine
  iSCSI jumbo frame
  iSCSI Header/Data digest support
  iSCSI CHAP authentication
  LCD control panel for setup and configuration (optional)
  System status indication through LCD, LED and alarm buzzer
  SMTP support for email notification
  SNMP support for remote manager
  Enclosure management ready
  RAID Management
  Field-upgradeable firmware in flash ROM
  Firmware-embedded manager via RS-232 port
  Firmware-embedded web browser-based RAID manager-
access your RAID subsystem from any standard internet browser via a LAN port
  Access terminal menu by telnet via a LAN port
  API library for customer to write its own monitor utility
  SAP management utility to easily manage multiple RAID units
in the network
  Software Drivers
  OS Independent
Dimension: 146 (W) x 43 (H) x 250 (D) mm
  Environmental Specifications
Operating: Temperature: 0° to 40°C
  Humidity: 10% to 80%
Storage Temperature: Temperature: -40° to 60°C
  Humidity: 5% to 95%
Power Requirements: 37.2W max. on +12V
  Optional Prouduct - Accessories
ARC-8026MB-Mounting Bracket

An ATX I/O Shield is a small metal plate located at the back of each rackmount chassis that provide openings for different I/O ports of a motherboard.

ARC-8026MB-Mounting Bracket for user to leverage the ATX I/O Shield position as ARC-8088-16GF RAID box I/O port. You can use ARC-8026MB to fit ARC-8088-2I RAID box I/O port in the standard ATX I/O-Slot found in a Rackmount Chassis.

↑ ARC-8088-2I on ATX I/O Shield
Legal InformationPrivacy PolicySitemapContact Us
Copyright © 2017 Areca Technology Corp. All rights reserved.