USA
 
  SATA RAID Adapters
  SAS RAID Adapters
  Mezzanine Board
  SAS Non-RAID Adapters
  External RAID Controllers
   
  Entry Level
-- Hi-Speed eSATA/USB3.0/iSCSI
   
  Enterprise
  Fibre to SAS
  SAS to SAS
  iSCSI to SAS
  JBOD/Expander Box
  Desktop RAID Subsystem
  Internal RAID Rack
  Thunderbolt Solutions
  External PCIe RAID
 
     

Home

> Products > External RAID Controllers
      > Hi-Speed eSATA/USB3.0/iSCSI
      > Fiber to SAS> iSCSI to SAS > SAS to SAS


Relatived Resource  
 
ARC-5066 DataSheet
ARC-5066 Manual
 

 

 

   
 

ARC-5066 (Hi-Speed eSATA/USB 3.0/iSCSI)

 
 
The ARC-5066 RAID controller is a family of 12/16/24 6.0Gbps SATA hard drive ports depending upon the amount of storage required. The ARC-5066 storage controller is designed to provide a truly innovative multiple host interfaces to address the needs of different cost-effective RAID storage requirements.
When properly configured, the RAID controller can provide non-stop service with a high degree of fault tolerance through the use of RAID technology and advanced array management features. The 4 port iSCSI connections deliver high performance, advanced function, high availability, and scalable storage capacity with both direct iSCSI host and IP network connectivity. High transfer rates and more SATA disk channels provide a major benefit for those applications requiring cost-effective RAID solutions that take advantage of low cost, high capacity SATA disk drives, especially the rapidly growing demand from the Vmware ESX server external storage, DVR markets and cold storage.
   
  Adapter Architecture
  1.2GHz storage I/O processor
  2GB on-board DDR3-1200 SDRAM with ECC protection
  Support up to 24 internal 6.0Gbps SATA ports
  NVRAM for event logs & transaction log
  Write-through or write-back cache support
  Redundant flash image for controller availability
  Battery backup module ready (optional)
   
  RAID Features
  RAID level 0, 1, 10(1E), 3, 5, 6, 30, 50, 60, Single Disk
    or JBOD
  Multiple RAID 0 and RAID 10(1E) support (RAID 00
    and RAID100)
  Multiple RAID selection
  Configurable stripe size up to 1024KB
  eSATA host: 8 volumes(with port multiplier), iSCSI
    host:128 volumes and USB 3.0 host: 8 volumes
  Online array roaming
  Online RAID level/stripe size migration
  Online capacity expansion and RAID level migration
    simultaneously
  Online volume set growth
  SED (self-encrypting drives) function support
  Instant availability and background initialization
  Support global and dedicated hot spare
  Automatic drive insertion/removal detection and
    rebuilding
  Support for native 4K and 512 byte sector SATA
    devices
  Multiple pairs SSD/HDD disk clone function
  SSD automatic monitor clone (AMC) support
  Support HDD firmware update
  Support intelligent power management to save
    energy and extend service life
   
  Host Interface
  1 x 6.0Gbps eSATA
  1 x 5.0Gbps USB 3.0
  4 x 1.0Gbps GbE iSCSI
   
- Jumbo frame support
- Header/Data digest support
- CHAP authentication
- MPIO, MC/S, Trunking and LACP(802.3ad) support
   
  Disk Interface
  12/16/24 x 6.0Gbps SATA ports
  Up to 6 x SFF-8087 drive connector
   
  Monitors/Indicators
  Environment and drive failure indication through LCD,
    LED and alarm buzzer
  Keep silent and adequate air flow and cooling by
    intelligent cooling fan speed control
  SMTP support for email notification
  SNMP support for remote manager
  Support 4 x 3-pin fan connector
  Support 2 x 2-pin power status connector
   
  RAID Management
  Field-upgradeable firmware in flash ROM via RS-232
    and LAN port
  Push Buttons and LCD for setup and status
  Firmware-embedded manager via RS-232 port
  Firmware-embedded Browser-based RAID manager,
    SMTP manager, SNMP agent and Telnet function via
    LAN port
  Support RAID box’s API library for customer to write
    its own AP
     
  Environmental/Physical
  Mechanical
 
Dimension: 146 (W) x 43 (H) x 200 (D) mm
     
  Environmental Specifications
 
Operating: Temperature: 0° to 40°C
  Humidity: 10% to 80%
  non-condensing
 
Storage Temperature: Temperature: -40° to 60°C
  Humidity: 5% to 95%
  non-condensing
   
  Electrical
 
Power Requirements: 37.2W max. on +12V
     
     
  Optional Prouduct - Accessories
 
 
ARC-8026MB-Mounting Bracket
  An ATX I/O Shield is a small metal plate located at the back of each rackmount chassis that provide openings for different I/O ports of a motherboard.

ARC-8028MB-Mounting Bracket for user to leverage the ATX I/O Shield position as ARC-5066 box I/O port. You can use ARC-8028MB to fit ARC-5066 box I/O port in the standard ATX I/O-Slot found in a Rackmount Chassis.


↑ ARC-5066 on ATX I/O Shield


     
   
     
Legal InformationPrivacy PolicySitemap Contact Us │ Copyright © 2005 Areca Technology Corp. All rights reserved.