USA
  SATA RAID Adapters
  SAS RAID Adapters
  Mezzanine Board
  SAS Non-RAID Adapters
  External RAID CTRL
  JBOD/Expander Box
  RAID Subsystem
   
  Desktop RAID
  ARC-8042
  ARC-5020
   
  Rackmount RAID
-- ARC-71xx series
  ARC-72xx series
  ARC-9200 series
  Internal RAID Rack
  Thunderbolt Solutions
  External PCIe RAID
 
     
Home

> Products > RAID Subsystem
      > ARC-8042 > ARC-5020
      > ARC-71xx > ARC-72xx > ARC-9200


Relatived Resource  
 
ARC-71xx Manual
ARC-71xx Installation Guide
ARC-71xx SPEC
 

 

 

 
 

ARC-71xx series

(GbE(x4) / 6Gbps eSATA / USB 3.0 to SATA RAID Storage Subsystem)

The ARC-71xx RAID subsystem is a family of 8/12/16/24 6.0Gbps SATA hard drive ports depending upon the amount of storage required. The ARC-71xx supports multiple host interfaces; eSATA lll, iSCSI or USB 3.0 that can work with different application requirement.

When properly configured, the RAID subsystem can provide non-stop service with a high degree of fault tolerance through the use of RAID technology and advanced array management features. The 4 port iSCSI connections deliver high performance, advanced function, high availability, and scalable storage capacity with both direct iSCSI host and IP network connectivity.

 

   
  Host Interface
  1 x 6.0Gbps eSATA
  1 x 5.0Gbps USB 3.0
  4 x 1.0Gbps GbE iSCSI
   
  Management Interface
  1 x D-Sub connector
  1 x LAN RJ-45 connector
   
  Drive Interface
  Up to 8/12/16/24 x 3.5”/2.5” 6Gb/s and 3Gb/s SATA
    HDDs/SSDs
   
  System Architecture
 

Quad Core ARM V7 1.2 GHz processor
  2GB on-board DDR3-1200 SDRAM with ECC
    protection
  Support up to 24 internal 6.0Gbps SATA ports
  LAN with MPIO, MC/S, Trunking and LACP support
  Battery backup module ready (optional)
   
  RAID Features
  RAID level 0, 1, 10(1E), 3, 5, 6, 30, 50, 60, Single
    Disk or JBOD
  Multiple RAID 0 and RAID 10(1E) support (RAID 00
    and RAID 100)
  Automatic drive failover and detection and rebuild
    using multiple Global, D edicated or Enclosure hot-
    spare drives
  Multiple pairs SSD/HDD disk clone function
  SSD automatic monitor clone (AMC) support
  Support for native 4K and 512 byte sector devices
  Support HDD firmware update
  Hot-swap and redundant components for increasing
    availability
  eSATA host: 8 volumes(with port multiplier), iSCSI
    host:128 volumes and USB 3.0 host: 8 volumes
  Configurable stripe size up to 1024KB
   
  Monitors/Indicators
  Environment and drive failure indication through
    LCD, LED and alarm buzzer
  Keep silent and adequate air flow and cooling by
    intelligent cooling fan speed control
  SMTP support for email notification
  SNMP support for remote manager
  Enclosure management ready
   
  RAID Management
  Field-upgradeable firmware in flash ROM via RS-232
    and LAN port
  Push Buttons and LCD for setup and status
  Firmware-embedded manager via RS-232 port
  Firmware-embedded Browser-based RAID manager,
    SMTP manager, SNMP agent and Telnet function via
    LAN port
  Support Out-of-Band API with sample and functional
    code for customer quickly customizing its AP
   
  Operating System
  OS Independent
   
  Environmental/Physical
  Mechanical
 
Dimension
2U 8/12 bays 19-inch rackmount chassis (H x W x D)
• Without handles:
   88.2 x 445 x 448 mm (3.5 x 17.5 x 17.6 in)
• With handles:
   88.2 x 482 x 484 mm (3.5 x 18.9 x 19.0 in)
3U 16 bays 19-inch rackmount chassis (H x W x D)
• Without handles:
   132.6 x 445 x 448 mm (5.2 x 17.5 x 17.6 in)
• With handles:
   132.6 x 482 x 484 mm (5.2 x 18.9 x 19.0 in)
4U 24 bays 19-inch rackmount chassis (H x W x D)
• Without handles:
   176.4 x 445 x 448 mm (6.9 x 17.5 x 17.6 in)
• With handles:
   176.4 x 482 x 484 mm (6.9 x 18.9 x 19.0 in)
Weight
• Single: 26.4 kg/27 kg/31 kg/34 kg (58.2 lb / 59.5 lb / 68.3 lb / 75.0 lb)
• Dual (only for 24 bays): 35 kg (77.2 lb)
     
  Environmental
 
Operating Temperature: 0°c ~ 40°c
Humidity: 10~80%, non-condensing
Storage Temperature: -40°c to 60°c
Humidity: 5~95%, non-condensing
     
  Electrical Requirements
 
Power Supply

Dual/Triple hot swap and redundant with PFC, N+1 design
• Wattage 400 W maximum continuous
• Voltage 100–240 V rated
• Frequency 50–60 Hz
• Amperage (Max) 6.18A (120 VAC), 3.23A (230 VAC)

     
  Optional Prouduct - Accessories
   
  Flash-based Back-up Module
   
 

ARC-6120BAT121-12G Cables & Bracket
     
   
Legal InformationPrivacy PolicySitemapContact Us
Copyright © 2017 Areca Technology Corp. All rights reserved.